Stainless steel high quality honey extractor 4 frames
4 frames honey for DNM, Zander and Langstroth - Completely made of stainless steel
From our own production! NISALA
From our own manufacture!
Made in Europ!
HS-4 professional manual honey extractor
made of food production applicable stainless steel
Type 1.4301 (304)
This certificate shows that we only use food grade stainless steel for the manufacture of our honey extractors and honey tanks.
We offer you for your professional apiary solely high-quality beekeeping equipment. Our honey extractor HS-4 is a product of qualified engineering, premium materials and, not least a masterful processing.
Make your work more comfortable and put your focus on professionalism while choosing your equipment. Good equipment will increase the joy in the work and also the yield of your efforts.
In regard to food hygiene:
We take care at all our products that honey can come only with austenitic stainless steel 1.4301 (III d) in contact. Austenitic steels are not ferromagnetic, ie, a magnet does not attract this steel. The advantage of such steel is that it is more resistant to acids and its particular suitability for cold forming. Not austenitic steels are not suitable for cold processing the food-manufacturing equipment as it would cause fine cracks, offering space for dirt and bacteria.
- tank, basket and discharge valve are made of food-grade stainless steel 1.4301 (18/10 stainless not magnetic)
- hand drive 1:3 with durable bronze mounting
- clear plexiglass top
- 3 sturdy legs with attachment to the floor for a very stable support
- 4 honeycomb stainless steel baskets (1.4301 food-grade) without any coating for frames up to 10 5/8" x 19 5/8" (27 cm x 50 cm external dimensions); suitable for DN (Deustch Normal), Langstroth, Zander, BN (British National) and many other, too
- stainless steel discharge valve (1.4301 food-grade) soldered from the outside, thus there is no contact of the solder joint to the honey
total height 43 2/8" (110 cm)
tank diameter 19 5/8" (50 cm)
all following dimensions are in millimeter (mm):
Lattice area of the honeycomb basket 10 1/4" x 17 6/8" (26 cm x 45 cm); honeycombs up to 10 5/8" x 19 5/8" (27 cm x 50 cm) can be centrifuged
height of the discharge valve 13 1/2" (34,5 cm)
Robust hand drive 1:3 with freewheel and backpedalling brake. The crank does not rotate on its own, only when they are served (no risk of injury). If you push the handle in the opposite direction, the spin of the basket will be decelerated.
The crank and the housing are made of aluminum, the drive shaft and the gears are made of steel. The drive has a bronze mounting of the axis of rotation, this grants a very long life.A gripper mechanic secures the opend lid, so it is guaranteed that the cover can not fall accidentally during loading and unloading.
The mesh of the honeycomb basket is slightly rounded to the inner side in order to avoid a break of honeycombs.
The honecomb basket is exceptionally robust and easy to remove for cleaning.
The ejection process can be observed through the plexiglass cover very well.The grid used for the stainless steel wire basket is from our supplier Hagen Feinstahl®. A 3-fold tank bottom edge roller-seam welded with an massive external stainless steel band and three sturdy legs of stainless steel (1.4301) provide the necessary stability. In addition, the feets can be bolted to the floor, this grants a specific support and the honey extractor can not slip.
The Transverse is completely made of robust steel.
Transverse and hand drive are screwed tight, the Plexiglas cover is rivetted.
Only two screws have to be removed for cleaning and removal of the basket.
The outlet cock can be closed easily and securely. It is completely made of food-grade stainless steel (1.4301), with an easy replaceable food-grade rubber gasket. The height of the outlet cock to the floor is 13 1/2" (34,5 cm).
The pinch-cock is located at the lowest point of the bottom. The bottom is sloping towards the pinch-cock. The honey runs on its own without tiresome tilting of the extractor.
The stainless steel plate of the tank is expensive (about 5mm deep) deep-drawed into the discharge pipe of the cock and then soldered from the outside, thereby the draining honey has no contact to the solder joint!
The edge of the tank is crimped technically very complex. This gives a very high strength to the edge and guarantees next to the corrosion resistance also the food grade of the edge. This makes contacts of the honeycombs with the edge unproblematic. All seams are welded using plasma technology.
- 1 x centrifugal tank of stainless steel (1.4301)
- 1 x outlet cock of stainless steel (1.4301)
- 2 x lid made of Plexiglas
- 1 x hand drive with bronze mounting
- 1 x 4 honeycombs basket made of stainless steel (1.4301)
- 3 x legs
All parts are completly assambeld, only the legs has to be mounted
Manufacturer: Nisala (own production)
2 years warranty
You will get a bill with declared goods and service tax.
Picking up is possible. Deliveries to Swiss regrettably are not possible.
Be sure that we will always be available should there should be any problems with the honey extractor at any time!
We guarantee a perfect transaction to you !
You can return any item within 30 days, should anything we sell not suit your expectations, so buy with confidence.
There is no risk when you purchase from us!
Our rating shows that you can trust us. For any questions you can contact us at any time.
We have specially developed a special packaging for this honey extractor. Therefore transport damages should not occur.
The shipping is fast and well insured by DHL.